Using The Supplied Microphone - Sony HXR-NX30N Operating Manual

Using the supplied microphone

Attach the XLR Adaptor when you use the
supplied microphone (ECM-XM1). You can
record monaural sound with the super-
directional microphone.
Inputting external sound
 INPUT1 jack
 INPUT2 jack
US

Selecting a sound source
 INPUT1 (LINE/MIC/MIC+48V) switch
 INPUT2 (LINE/MIC/MIC+48V) switch
Selecting a sound source level
 ATT (INPUT1) switch
 ATT (INPUT2) switch
Selecting channel setting for
recording
 REC CH SELECT (INPUT1) switch
Selecting the recording level
 AUTO/MAN (CH1) switch
 AUDIO LEVEL (CH1) dial
 AUTO/MAN (CH2) switch
 AUDIO LEVEL (CH2) dial
Switching wind noise reduction to
ON/OFF
 LOW CUT (INPUT1) switch
 LOW CUT (INPUT2) switch
1
Attach the XLR Adaptor (p. 12),
and connect the supplied
microphone to INPUT1 jack .
2
Set the INPUT1 (LINE/MIC/
MIC+48V) switch  to MIC+48V.
3
Set the REC CH SELECT (INPUT1)
switch  to CH1·CH2
This setting enables recording on both
CH1, CH2. Set the switch to CH1 if
you want to record on CH1 only.