HANNspree Hanns.G HL274 User Manual page 16

User's Manual
SHARPNESS
SIGNAL SOURCE
SIGNAL SOURCE
OSD MENU
LANGUAGE
OSD H-POSITION
OSD V-POSITION
OSD TIMER
TRANSLUCENCE
MISC
VOLUME
RESET
SCALE
INFORMATION
Select the「SHARPNESS」option to adjust the sharpness of the
display. Set the value from -2 to 2.
Select the 「SIGNAL SOURCE」option to change between
analog (VGA) or DVI or HDMI source. Enter the option and
select Analog or Digital.
Select 「LANGUAGE」 option to change the language of the
OSD. Enter the option and select a language.
Select 「H-POSITION」 option to adjust the horizontal position of
the OSD. Enter the option and adjust the level.
Select 「V-POSITION」option to adjust the vertical position of
the OSD. Enter the option and adjust the level.
Select 「OSD TIMER」option to set the OSD time out from 3 to
60 Enter the option and adjust the level.
Select 「TRANSLUCENCE」 option to adjust the transparency of
the OSD. Enter the option and adjust the level.
Select the 「VOLUME」 option to change the volume level. Enter
the option and adjust the level.
models with incorporated audio.]
By high volume, risk of hearing damage exists.
Select the 「RESET」option to reset to the monitor's default
setting. This will erase the current settings. Enter the option and
select On or Off.
Select the 「SCALE」option to select 4:3 or 16:9
Display Signal Source /Vertical frequency/Resolution
information.
16
[This function applies only to