Table of Contents
Advertisement
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
– Do not use gelatinous or thick liquid detergents.
– Do not put more liquid then the maximum level.
– Do not set the prewash phase.
– Do not set the delay start.
9.3 Setting a programme
1.
Turn the programme knob and set
the programme:
• The indicator Start/Pauze flashes.
• The display shows the programme
duration.
2.
If necessary, change the tempera-
ture, the spin speed, the cycle dura-
tion, or add available options. When
you activate an option, the indicator
of the set option comes on.
If you set something incorrect,
the display shows the message
Err.
9.4 Starting a programme
without the delay start
Press Start/Pauze button:
• The indicator of button Start/Pauze
stops to flash. The indicator
• The programme starts and the door
locks.
• The programme time decreases with
steps of one minute.
9.5 Starting a programme with
the delay start
• Press Startuitstel again and again until
the display shows the delay you want
to set.
• Press Start/Pauze:
The appliance starts the countdown.
The indicator
When the countdown is completed,
the programme starts automatically.
You can change or cancel the de-
lay start before you press Start/
Pauze. After pressing Start/Pauze
you can only cancel the delay.
is on.
goes on.
To cancel the delay start:
1.
Press Start/Pauze to set the appli-
ance to PAUSE.
2.
Press Startuitstel. The display shows
'.
3.
Press Start/Pauze again to start the
programme immediately.
9.6 Interrupting a programme
and changing the options
You can change only some options be-
fore they operate.
1.
Press Start/Pauze. The indicator
flashes.
2.
Change the options.
3.
Press Start/Pauze again. The pro-
gramme continues.
9.7 Cancelling a programme
1.
Turn the programme knob to
Uit position to cancel the pro-
gramme and to deactivate the appli-
ance.
2.
Turn the programme knob again to
activate the appliance. Now, you can
set a new washing programme.
The appliance does not drain the
water.
9.8 Opening the door
While a programme or the delay start
operates, the appliance door is locked.
The indicator
is on.
CAUTION!
If the temperature and level of
the water in the drum are too
high, you cannot open the door.
ENGLISH
13
Aan/
Advertisement
Table of Contents
