Table of Contents
Advertisement
Connecting to cabinets
Connect the M-Box (SBB-MBOX) and the cabinet (IW008R) to the installed cabinet for video
signal transmission.
" Connect the M-Box to the external device before connecting the M-Box to the cabinet.
" Before connecting power to the cabinets, connect the BRIDGE BOX to the cabinets first.
" Connect only one type of LED pitch cabinets to a single M-Box. Normal picture quality may
not be obtained if different types of cabinets are connected. Do NOT use different types of
LED pitch cabinets together.
M-Box
(SBB-MBOX)
BRIDGE BOX
BLUETOOTH
HDBT IN
LAN
ONE CONNECT
HDBT OUT
Last cabinet (Vertical Pillar)
(IW008R)
DATA IN
DATA OUT2
First cabinet
Last cabinet (Horizontal Pillar)
(IW008R)
(IW008R)
DATA IN
DATA OUT 1
DATA IN
WI-FI
1
Connect the HDBT terminals on the M-Box and BRIDGE BOX using a LAN cable.
" Use a cable of CAT 6 (*STP type) or higher.
*STP: Shielded Twisted Pair
" Connect the HDBT by using a LAN cable that is 15–100 m in length. If you use a cable that
is out of specified length range, the signal quality may be unstable.
" Use the LAN cables recommended on the HDBaseT website (http://hdbaset.org/hdbaset-
recommended-cables). If a LAN cable that is not recommended is used, the HDBT signals
may become unstable.
2
Use cables enclosed with the M-Box(SBB-MBOX) unit to connect to the BRIDGE BOX and
cabinets.
Supported resolutions per installation
Resolution
1920 x 1080
Quantity of cabinets
2 x 2
" M-Box(SBB-MBOX) unit includes 8 ONE CONNECT ports, supporting up to 8K resolution.
3840 x 2160
7680 x 4320 (8K)
4 x 4
8 x 8
11
Advertisement
Table of Contents
