Maintenance; Criteria For Maintenance; Routine Maintenance Schedules - Stiga ZT 3107 T Workshop Manual

WORKSHOP MANUAL

2.4.1 Criteria for maintenance

The Instruction Handbook has a number of operations to be carried out by the Customer for a
minimum of basic maintenance, and other operations not always within his capacity. For this rea-
son the Service Centre should undertake to keep the machine in perfect working order adopting
a routine maintenance schedule.

2.4.2 Routine maintenance schedules

The routine maintenance schedule includes a series of interventions, at the intervals indicated in
the table below:
INTERVAL
Every 25 hours
or
seasonally
Every 50 hours
or
seasonally
Every 100 hours
or
seasonally
ZT 3107 T

2.4 MAINTENANCE

OPERATION
Check the safety systems
Check and adjust the
parking brake
Cleaning the machine
Check the tyres
Check and sharpen the
cutting deck blades
Check the battery
Machine lubrication
Check the fixing elements
Check the muffler and
spark guard
Check the belts
Chapter
2 - SERVICING RECOMMENDATIONS
DANGER!
and incorrect operation of the machine can result in
death or serious injury.
Check that the safety systems are working correctly as in-
dicated. [
Apply the parking brake and engage the transmission by-
pass lever. Push the machine and, if it moves, adjust the
parking brake accordingly.
Clean the machine (seat, cutting deck, etc. removing all
dirt and debris). Do not use high pressure washers, sol-
vents, aggressive detergents or abrasive cleaners. Re-
store damaged paint using STIGA paint.
See the technical specifications
Check that the blades are not worn or damaged. Sharpen
and balance the blades.
Keep the battery terminals and the battery itself clean at
all times [
1) Apply grease to each front wheel greaser
2) Apply grease to the seat adjustment system, through
the fissures on the underside of the driver seat plate.
Distribute the grease in the mechanism by sliding the
seat backwards and forwards several times.
Check the blades
and the other fixing elements.
Replace all missing or damaged fixing elements.
Tighten the screws and nuts to the correct torque.
[ 2.2.3]
Replace the muffler and (if present) the spark guard if
there are signs of corrosion.
Replace worn or deteriorated belts.
Check the drive belt.
Check the blade control belt.
ACTION
Failure of the safety lock system
7.1.2]
[ 5.1.2]
[
[ 6.2.5]
7.2.2]
[ 6.2.4], the assembly nuts and bolts
[ 5.2.4]
[ 6.3.1]
EDITION PAGE
2017 11 /
59
3.1]
[ 5.3.2]