How To Charge Easykey In An; How To Replace Batteries; How To Charge Lithium Battery - Philips Alpha Series User Manual

How to charge EasyKey in an emergency
Reboot and USB interface
How to replace battery
How to charge the lithium battery
When the battery voltage is low and the door
can not be opened from outside, you can power
up the door lock by plugging 5V power bank
into the micro USB. After unlocking the door,
please replace the battery instantly.
If system carsh occurs and the door lock can not
be opened from the outside, you can power
up the door lock using 5V power bank and the
system will reboot itself automatically.
Philips Easykey is powered by a 5000mA/h
lithium battery.
The battery compartment is in the upper part
of the rear escutcheon. Push the battery cover
upward and remove it, then replace the battery.
Remove the battery from the door lock, and
charge it via a charging cable.
Attention
1. Lithium battery is guaranteed for one year.
2. For a lithium battery, the charge cut-off
voltage is 5V.
3. A bad network connection will increase
power consumption at a faster rate.
23