Enter Master Mode - Philips Alpha Series User Manual

How to enter master
mode
Wake up the keypad and enter [#] twice
before you enter any other numbers, then
enter master PIN code and enter [#] to enter
the master mode.
Attention
If the master PIN code is the default PIN of
12345678, please follow the below steps to
change the master PIN code on keypad first:
enter master mode, enter [1] followed by [5]
and then enter the new master PIN code.
Master fingerprint
Light up the keypad and enter [*] twice
before you enter any other numbers. Then
place the registered master fingerprint
against fingerprint sensor to go into the
master mode.
10
Attention
1. Product in factory mode does not come
with master fingerprint, please enroll a
master fingerprint first before operation.
2. It is recommeded that the master
fingerprint and user fingerprint should not
share the same finger.
User settings
Add a new user PIN code
Enter [*] twice followed by master PIN code,
and confirm with [#].
1 1
Enter [1] to go to user setting and enter
[1] again to add user information. You can
directly add a desirable information (PIN
code, fingeprint or Key tag) and the system
will automatically identify and add what
you have entered.
Way to add a new PIN code: Enter a new
user PIN code and confirm with [#]. Enter
the new PIN code again and confrim
with [#]. Once heard a voice prompt of
"Succeeded", keep pressing [*] until you
finally exit the master mode.
Way to add a fingerprint: Place your finger
on the fingerprint sensor. When you hear
a voice prompt of "Move your finger and
put on again", lift your finger and repeat
the process until you hear a voice prompt
of "Succeeded". After you have successfully
registered your fingerprint, keep pressing
[*] until you finally exit the master mode.
Way to add a Keytag: Place the key tag
against the keytag reader. After hearing a
voice prompt of"Succeeded', keep pressing
[*] until you finally exit the master mode.