Table of Contents
Advertisement
Pull out the condensation hose
1.
from the connecting piece.
The condensation hose is connec-
ted to the connecting piece at the
factory.
Note: When removing the con-
densation hose, liquid may leak
out of the connecting piece.
Push the condensation hose into
2.
the holder.
Installation and connection en
Push the water drain hose as far
3.
as it will go into the connecting
piece.
Insert the water drain hose into the
4.
hose guide.
Ensure that you do not bend the
water drain hose.
Connect the appliance to the water
5.
outlet.
→ "Water outlet connection types",
Page 15
Tip: To collect condensation in the
condensation container again (e. g. if
you change where the appliance is
located), carry out these steps in re-
verse order.
Water outlet connection types
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 11.
15
Advertisement
Table of Contents
