erate properly, or this may result in
material damage or damage to the
appliance.
Do not operate the appliance with
▶
incomplete or defective accessor-
ies.
Replace the accessories in ques-
▶
tion before operating the appli-
ance.
→ "Accessories", Page 30
Scope of deliv-
ery
4.3 Requirements for the in-
stallation location
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 11.
ATTENTION!
The appliance underwent a function
test before leaving the factory and
may, therefore, contain residual wa-
ter. This residual water may leak out
if the appliance is tilted at an angle
greater than 40°.
Tilt the appliance carefully.
▶
Description
Tumble dryer
Accompanying
documents
Water drain hose
with connection
adapter, fixing
material and el-
bow.
→ "Water drain
hose",
Page 14Water
drain hose
Installation and connection en
If the appliance is installed in areas
exposed to frost or outdoors, frozen
residual water may damage the appli-
ance and frozen hoses may crack or
split.
Do not install or operate this appli-
▶
ance anywhere that is liable to ex-
perience frost and/or outdoors.
If the appliance is operated immedi-
ately after transportation, the refriger-
ant contained in the appliance may
result in damage to the appliance.
Immediately after transporting the
▶
appliance, leave it to rest for two
hours before putting it into opera-
tion.
Installation loca-
tion
On the floor
Requirements
Place the appli-
ance on a clean,
level and firm
surface.
Align the appli-
ance
→ Page 16.
13