Replacing the optical drive
Before you start, print these instructions.
To replace the optical drive, do the following:
1. Turn off the computer and then disconnect the ac power adapter and all cables from the computer. Wait
three to five minutes to let the computer cool.
2. Close the computer display, and turn the computer over.
3. Remove the battery pack. See "Replacing the battery pack" on page 27.
4. Remove the screw
5. Insert a screwdriver into the screw hole
the arrow
3
to slide it out.
6. Insert a new optical drive, and then reinstall the screw to secure the drive.
7. Reinstall the battery pack. See "Replacing the battery pack" on page 27.
8. Turn the computer over again. Connect the ac power adapter and all cables.
34
User Guide
1
that secures the optical drive and the keyboard.
2
, and then push the optical drive in the direction shown by
a