Unfolding The Handle - Toro Super Recycler 20055 Operator's Manual

Setup
Important: Remove and discard the protective plastic
sheet that covers the engine.

Unfolding the Handle

Warning
Folding or unfolding the handle improperly can
damage the cables, causing an unsafe operating
condition.
S
Do not damage the cables when folding or
unfolding the handle.
S
If a cable is damaged, contact an Authorized
Service Dealer.
1. Carefully move the upper handle forward until the
handle halves are in line and nest together.
A.
m-8108
B.
2. Tighten the
upper handle
knobs as tight as
you can by hand.
m-8095
5
3. Rotate the handle rearward.
A.
B.
4. Attach the
handle brackets
(A) to the lower
handle sides.
Note: Insert a
lock washer
between each
bracket and
knob, and
tighten the
lower handle
knob as tight as
m-8109
you can by
hand.
3353-548 Rev B
m-8110
A
m-8097
m-8109