Sharp EE2K Operating Instructions Manual page 13

Digital Audio (Optical)
Connecting your television and audio system with a digital optical cable.
Connect to the audio system digital optical input terminal.
Digital Audio Out
Optical
A AV Receiver or Soundbar
B Audio Optical cable (not supplied)
If there is no output on the digital optical output, ensure that the digital output is set to PCM.
To set, go to: Settings > Device Preferences > Sound > Digital Output to PCM.
The digital optical output is always present whatever source is selected.
RCA Analogue Audio Cable
Connect to the audio system's audio input terminal.
Earphone
AV Receiver or Soundbar
A
B Audio cable (not supplied)*
Note: The output audio level is dependent upon the headphone level. The volume level on the connected audio
system must be turned up.
A
B
Digital Audio In
A
B
Audio L/R
Getting Started
Optical
L
R
13 13