Table of Contents
Advertisement
4. Press the OK button to save the timer setting.
Repeat these procedures for Reservation
Schedule Settings #2 and #3.
5. During the reservation schedule, the preheating
icon turns on and the Reservation area starts
flashing.
3.8 Starting Recirculation
Press the Preheat & Timer button to start
recirculation immediately, regardless of the
reservation schedule.
"HEAT" appears for 4 seconds on the display and
then recirculation runs once.
During the recirculation, the preheating icon flashes
continuously.
This feature runs during the
Note
recirculation time set on the front
panel which the remote controller is
connected to.
3.9 Canceling Timer Settings
Press and hold the Preheat & Timer and OK button
simultaneously for 2 seconds.
"CLR" appears for 3 seconds and all timer settings
are canceled.
2
sec
Operating the Water Heater
15
Advertisement
Table of Contents
