Channel Confirmation Mode - Kenwood ProTalk NX-P1200AV User Manual

To conrm your channel settings:
With the transceiver power OFF, press and hold the PTT switch while turning
1
the transceiver power ON.
• Continue to hold the PTT switch until the LED lights yellow and the
transceiver announces "Conrm".
Release the PTT switch.
2
• The transceiver announces the Zone number of the selected channel.
Rotate the Selector to desired channel.
3
The transceiver announces the information of the current channel.
NX-P1200NV/ NX-P1300NU
Channel Type:
Zone number, Channel number, Channel type, Frequency table number, QT/
DQT table number, Transmit power, Scrambler status, and VOX status.
(Example: "Zone 1, Channel 1, Analog, Table 10, DQT 15, High Power,
Scrambler (when active), VOX (when active)")
Channel Type:
Zone number, Channel number, Channel type, Frequency table number, RAN
table number, Transmit power, Encryption status, and VOX status.
(Example: "Zone 1, Channel 1, Digital, Table 10, RAN 55, High Power,
Encryption (when active), VOX (when active)")
Channel Type: Mixed
Zone number, Channel number, Channel type, Transmit mode, Frequency
table number, QT/DQT table number, RAN table number, Transmit power,
Scrambler status, Encryption status, and VOX status.
(Example: "Zone 1, Channel 1, Dual, Analog, Table 10, DQT 15, RAN 55,
High Power, Scrambler (when active), Encryption (when active), VOX (when
active)")
NX-P1200AV/ NX-P1300AU/ NX-P1202AV/ NX-P1302AU
Zone number, Channel number, Frequency table number, QT/DQT table
number, Transmit power, Scrambler status, and VOX status.
• Press the PTT switch to repeat the voice announcement of the channel
information of the current channel.
• Press the Side 1 or Side 2 button to increment or decrement the zone
number with voice announcement of zone number.
• If the QT/DQT or RAN of the currently selected channel is not set, the
transceiver will not announce the QT/DQT or RAN table number.
Note:
◆ If no action is performed for 20 seconds, the transceiver will automatically return to
normal operation without changing any settings.

CHANNEL CONFIRMATION MODE

Analog
NXDN
34