Table of Contents
Advertisement
1
2
2
Figure 31
1. Fuel line from tank
2. Hose clamp
3. Filter
4. Squeeze the ends of the hose clamps together and
slide them away from the filter (Figure 31).
5. Remove the filter from the fuel lines.
6. Install a new filter with the flow direction arrow
coming from the fuel tank and pointing to the
engine. Move the hose clamps close to the filter
(Figure 31) to secure it in place.
6
3
5
G005071
4
4. Fuel line to engine
5. Flow direction arrow
6. Fuel tank
Electrical System
Maintenance
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, and related
accessories contain lead and lead compounds,
chemicals known to the State of California
to cause cancer and reproductive harm.
Wash hands after handling.
Charging the Battery
Removing the Battery
Battery terminals or metal tools could short
against metal machine components causing
sparks. Sparks can cause the battery gasses to
explode, resulting in personal injury.
• When removing or installing the battery, do
not allow the battery terminals to touch any
metal parts of the machine.
• Do not allow metal tools to short between
the battery terminals and metal parts of the
machine.
1. Park the machine on a level surface and disengage
the blade control switch.
2. Move the motion control levers outward to the
park position, stop the engine, remove the key, and
wait for all moving parts to stop before leaving the
operating position.
3. Remove the left side console to access the battery.
Refer the Accessing the Battery procedure in the
Premaintenance Procedures for instructions.
4. Disconnect the negative (black) ground cable from
the battery post (Figure 32). Retain all fasteners.
29
Warning
Advertisement
Table of Contents
