Meridian 220BST Operator's Manual page 31

6. Make sure the auger cable is threaded into
the hole in the end of the auger. Damage to
the auger can occur if the cable is not properly
inserted.
7. Raise the auger tube, by pushing it upward,
usingthedeliveryspout.Asmallgas‑filled
shock will assist in raising the auger tube.
8. Lock the auger tube to the seed tender using
the over-center clamp.
FALLING HAZARD
Locking the clamp of the auger tube
requires the operator to stand on the
fender. Use caution and do not slip
or fall when climbing on or off of the
seed tender.
9. Place the delivery spout onto the storage
18433
bracket and secure it with the rubber strap.
CAUTION
31