Table of Contents
Advertisement
Poor cleaning results
Problem
The dishware is not
clean.
There are streaks on
glassware and utensils.
There is a bluish sheen
on the surface of glass-
ware. The film can be
wiped off.
Frequently asked questions
Possible cause and solution
The dishware was not loaded correctly.
See notes under "Loading the dishwasher".
The program was not powerful enough.
Select a more powerful program (see "Program
overview").
Activate the Extra Clean function (see "Extra
Clean" under "Options").
Activate the "Second interim rinse" function (see
"Program options", "Second interim rinse" sec-
tion).
Not enough cleaning agent was dispensed during
manual cleaning agent dispensing.
Use more cleaning agent or change the brand you
are using.
Items are blocking the path of the spray arms.
Carry out a rotation check and if needed rearrange
the items so that the spray arms can rotate freely.
The filter combination in the wash cabinet is not
clean or was incorrectly installed.
This may have caused the spray arm jets to become
blocked.
Clean and/or install the filter combination correctly.
Clean the spray arm jets if necessary (see "Clean-
ing the spray arms" under "Cleaning and care").
The rinse-aid dosage is set too high.
Reduce the dosage (see "Rinse aid" under "Before
using for the first time").
67
Advertisement
Table of Contents
