GE APLS07 Owner's Manual And Installation Instructions page 13

Installation Instructions
Install Main Window Panel and
5.
Extension Panels
NOTE: Measure the window opening and use the
extension panels as referenced on page 11 to fit your
window.
1. Open the window and place the window kit
assembly into the window.
NOTE: The window assembly is designed to
accommodate either a double hung or sliding
window.
2
of the window as shown.
3. Depending on the number of extension panels
used, turn the knobs to secure the extension
NOTE: There are many window types on the market
secure the extension panels that will fit the window
opening.
49-5000544 Rev. 4
Double Hung Window
Sliding Window
Install from the back.
Install Main Window Panel and
5.
Extension Panels (cont)
For vinyl windows only.
Skip to step 6 for wood windows.
Place the two top window brackets and two bottom
window brackets where they will best support the
extension panels. Use pointed screws to attach top
bracket to the support panels.
Before Assembly
Use only for vinyl
A
B
After Assembly
Attach with pointed screw(2).
5
top of the window panel assembly, and then
bottom front edge of the window panel assembly,
as shown.
Typical Vinyl Window Installation
A
B
C
D
A
B
E
13