Important: You can easily damage the memory card and card slot by improper operation. Please
be careful when inserting, removing, or handling it. Do not over-insert the card as this can damage
the contact pins.
Charge the Battery
You will need to charge the battery before using your tablet.
1. Plug the USB cable into the USB Charger/Accessory Port on the bottom of the tablet.
2. Plug the USB cable into the charging head, and then plug the charging head into an electrical
outlet.
Turn Your Tablet On
Use the Power/Lock Key to turn your tablet on.
Press and hold the
n
If your tablet is activated, it will turn on, search for Sprint service, and begin the setup
l
application.
If your tablet is not yet activated, see Activate Your Tablet for more information.
l
Activate Your Tablet
Follow the instructions below to activate your tablet if it has not already been activated. Depending
on your account or how and where you purchased your tablet, it may be ready to use or you may
Get Started
Power/Lock Key to turn the tablet on.
2