Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
If the power cord is damaged, it must only be replaced with a spe-
cific cord of the same type (available from Miele Customer Service).
For safety reasons, this must only be done by Miele Customer Ser-
vice or a service technician authorized by Miele.
Do not place the dishwasher on the water inlet hose. The water in-
let hose must be free of kinks and able to move freely after installa-
tion.
Do not install the water inlet hose or the power cord next to a heat
source, such as a hot water pipe.
Do not expose the water inlet hose or the power cord to household
cleaners, vapors or other corrosive substances (such as chloride).
Damage to the power cord or water inlet hose can lead to electric
shocks or water damage.
Check the water inlet hose or the power cord for leaks and damage
after installation and every 6 months thereafter. Have the water inlet
hose or the power cord replaced if there are signs of damage.
The same applies to the drain hose.
Correct installation
The dishwasher must be installed and connected in compliance
with the supplied installation sheet.
Be careful before and while installing the dishwasher.
Some metal parts pose a risk of injury/being cut. Wear pro-
tective gloves.
The dishwasher must be correctly aligned horizontally to ensure
problem-free operation.
In order to ensure stability, built-under and integrated dishwashers
must only be installed under a continuous countertop which is se-
cured to adjacent cabinetry.
A sink in the adjacent cabinet of the dishwasher must be carefully
sealed. Regularly check for leaks to avoid damage to the dish-
washer.
12
Advertisement
Table of Contents
