Table of Contents
Advertisement
Do not install the dishwasher in a room where there is a risk of
frost. Frozen hoses are at risk of tearing or bursting. The reliability of
the electronic control unit may be impaired at temperatures below
freezing point.
To avoid any damage to the dishwasher, it must only be operated
when it is connected to a fully vented plumbing system.
The built-in Waterproof system offers reliable protection against
water damage if the following conditions are met:
- Installation has been carried out correctly.
- The dishwasher is properly maintained and parts are replaced in
case of noticeable damage.
- The water-supply faucet is turned off during longer absences from
the home (e.g., while on vacation).
The Waterproof system will work even when the dishwasher is
turned off. However, the dishwasher must remain connected to the
electricity supply.
The water-connection pressure needs to be between 7.25 and
145 psi (50 and 1,000 kPa).
A damaged dishwasher could be dangerous. If the dishwasher
gets damaged, turn it off at the electricity supply immediately and
contact your Miele dealer or Miele Customer Service.
The manufacturer's warranty may be invalidated if the appliance is
not repaired to Miele authorized service standards.
We recommend replacing defective components with original
parts. If original Miele parts are installed correctly, Miele ensures full
compliance with safety requirements and the warranty remains valid.
During installation, maintenance, and repair work, the dishwasher
must be disconnected from the electricity supply (turn it off and with-
draw the plug from the socket).
IMPORTANT SAFETY INSTRUCTIONS
11
Advertisement
Table of Contents
