Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DeWalt DCF888B
Summary of Contents for DeWalt DCF888B
- Page 1 Instruction Manual DCF888 20V Max* Tool Connect™ Impact Driver...
- Page 2 English Definitions: Safety Alert Symbols and Words This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
-
Page 3: General Power Tool Safety
English GENERAL POWER TOOL SAFETY b ) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust WARNINGS mask, non-skid safety shoes, hard hat, or hearing WARNING! Read all safety warnings and all protection used for appropriate conditions will reduce instructions. -
Page 4: Additional Specific Safety Rules
English into account the working conditions and the WARNING: Some dust created by power sanding, work to be performed. Use of the power tool for sawing, grinding, drilling, and other construction operations different from those intended could result activities contains chemicals known to the State in a hazardous situation. -
Page 5: Batteries And Chargers
English attention is needed, the battery electrolyte is composed of ..... wear hearing ..... visible radiation a mixture of liquid organic carbonates and lithium salts. protection ..... wear respiratory Contents of opened battery cells may cause • protection ..... read all respiratory irritation. - Page 6 English the applicable shipping requirements. If utilizing the Call 2 Recycle, Inc., in cooperation with D WALT and other shipping cap, the pack will be considered 3 batteries at battery users, has established the program in the United the Watt hour rating indicated for “Shipping”. If shipping States and Canada to facilitate the collection of spent nickel without the cap or in a tool, the pack will be considered one cadmium, nickel metal hydride or lithium-ion batteries.
- Page 7 English battery pack in the cavity. Unplug the charger before Minimum gauge for Cord sets attempting to clean. Total length of Cord in Feet Volts Wireless Certifications and Safety (meters) 120 V 25 (7.6) 50 (15.2) 100 (30.5) 150 (45.7) Information 240 V 50 (15.2) 100 (30.5) 200 (61.0) 300 (91.4) •...
-
Page 8: Charger Operation
English • The connectivity range is up to 100 feet (30.5 meters) nOTE: This could also mean a problem with a charger. depending on environment and location. If the charger indicates a problem, take the charger and battery pack to be tested at an authorized service center. •... -
Page 9: Storage Recommendations
English 2. The charger and battery pack may become warm to the This impact driver is a professional power tool. DO nOT touch while charging. This is a normal condition, and let children come into contact with the tool. Supervision is does not indicate a problem. -
Page 10: Assembly And Adjustments
English operate. For maximum tool life, use variable speed only for In the factory preset mode, when the trigger is released, starting holes or fasteners. the worklight will stay illuminated for up to 20 seconds. If the trigger switch remains depressed, the worklights will nOTE: Continuous use in variable speed range is not remain on. -
Page 11: Operation
English NOTICE: Always check the tool configuration prior • If you think batteries might have been swallowed to use. If you are unsure of the current configuration, or placed inside any part of the body, seek press the mode selector button (Fig. -
Page 12: Maintenance
English Proper Hand Position (Fig. H) Fastening time: Longer fasten ing time results in increased fastening torque. Using a longer fastening WARNING: To reduce the risk of serious personal injury, time than recommended could cause the fasteners ALWAYS use proper hand position as shown. to be overstressed, stripped or damaged. - Page 13 WALT BATTERY AND CHARGER SYSTEMS Chargers/Charge Time (Minutes) 120 Volts 12 Volts Battery Output Cat # Voltage DCB609 20/60 DCB606 20/60 DCB404 DCB406 DCB407 DC9360 DCB361 DC9280 DW0242 DCB200 45/30** DCB201 DCB203 DCB203BT* DCB204 60/40** DCB204BT* DCB205 75/47** DCB206 DCB207 DC9182 DCB120 DCB127...