Before First Use; How To Use; Grill Function - Salton AF2090 Instruction Booklet

BEFORE FIRST USE

1. Read all instructions carefully and keep them for future reference.
2. Remove all packing material or labels on the product.
3. Wash the Basket and Basket Rack in warm soapy water with a non-
abrasive sponge. Dry thoroughly.
Wipe the inside and outside of the product with a damp cloth.
NOTE: NEVER IMMERSE THE MAIN HOUSING IN WATER OR
ANY OTHER LIQUID.
4. The Air Fryer is a fat-free fryer that uses hot air heating technology.
Never pour oil or fat into the Air Fryer.
5. IMPORTANT: During first use, the Air Fryer may emit a slight odor
and smoke. This is normal and will only last a few minutes.

HOW TO USE

GRILL FUNCTION

1. Place the Main Body on a flat, level, heat resistant surface with the
Heating Coil facing up. It is recommended to leave a minimum of 6
inches (15 cm) of space between the Main Body and nearby objects.
2. Place the Grill Plate legs into the holes at the four corners of the
Main Body.
3. Plug into a 120V AC wall outlet. Ensure that the power cord is not
touching any hot surface.
4. The preset temperature of 400ºF will flash. If a temperature change
is needed press the Decrease Temperature (
Temperature Buttons (
The temperatures increase or decrease by 5ºF with each press of
the buttons. To change the temperature faster hold the Increase or
Decrease Temperature Button.
5. Press the Start/Stop Button (
temperature will illuminate and remain on indicating that the Grill is
heating.
6. Allow the Grill Plate to heat for approximately 2 minutes before
placing food on the Grill Plate.
7. When cooking is complete press the Power Button (
grill function off.
IMPORTANT: The Grill Function has a safety feature that allows
a maximum 1 hour cooking time and will shut off automatically. If
you wish to resume cooking after 1 hour follow steps 4 and 5.
8. NOTE: The Grill Plate will be very hot during cooking. DO NOT
touch. If the Grill Plate is removed during cooking, the appliance will
shut-off and the Control Panel will need to be reset when the Grill
Plate is replaced.
) to adjust to your desired temperature.
) to start heating. The set
) or the Increase
) to turn the
5