Connecting To A Network; Start A Connection - Philips WT121 Series User Manual

10.0.0 CONNECTING TO A NETWORK
You can setup a connection to a wireless network (WLAN) or a wired network (LAN).
10.1.0 WLAN
Your ProScribe includes a wireless LAN module.
10.1.1 START A CONNECTION
Method One
Tap (right click) on the WinBond or Ralink network icon that resides in the taskbar at the bottom of your screen.
• Select "Restore"
•The "Winbond or Ralink wireless utility" pops-up
•Select the "Site Survey" tab
• Select one of the available networks
Press the "config" button to adjust the wireless network properties
WinBond
Ralink
WinBond
Method Two
The WLAN setup is strictly dependent on the existing wireless network infrastructure.
A example of WLAN setup is depicted:
• From the Winbond or Ralink Wireless Utility icon on the Windows Taskbar select: "Start Windows Zero
Configuration"
• Navigate through : "START -> Settings -> Control Panel -> Network Connections -> Wireless Network Connetion"
and select one of the available networks.
• If required, insert a network key or password.
• To further configure the WLAN parameters on the "Wireless Network Connection" "Related Tasks" panel, select
"Change advanced settings".
•The "Wireless Network Connection Properties" dialog pops up, select "Wireless Networks" tab
• Select the preferred network and press "Properties" to adjust the authentication / encryption parameters.

Ralink
WT11