Meaning Of The Led Indicators - ABB EBN861 Operating Instruction

EBN853 / EBN861 ELECTRONIC UNIT | OI/EBN853/EBN861/EX-EN REV. C

Meaning of the LED indicators

The LEDs 100 % / 0 % on the commissioning and service field (Figure 17 on page 32, Pos.
on the function that has been initiated.
LED Flash code 0 % / 100 %
Note
The flash codes for MAN (manual) operating mode through ISF or binary input / graphic user interface can also occur at the same
time.
Change from one to two columns
Description
Adjustment mode
Both LEDs flash synchronously at 4 Hz.
Accept 1. Position correct
Depending on which position is approached first, either LED 100 % flashes at 1 Hz and LED
0 % continues to flash at 4 Hz, or vice versa.
Accept 2 Position correct
Both LEDs flash at 1 Hz.
Failure
Both LEDs flash alternately at 4 Hz.
ECOM688 or ECOM700 mode
Both LEDs light continuously (from software version 2.00).
MAN operating mode (manual) through ISF
The LED 0 % flashes at 1 Hz, LED 100 % is off (from software version 2.00).
MAN (Manual) operating mode via binary input or graphical user interface
The LED 100 % lights continuously, LED 0 % is off (from software version 2.00).
2 + 6 ) flash at different rates, depending
33