Product View - Bissell CLEANVIEW SWIVEL PET REWIND 2256 Series User Manual

Product View

WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating procedures.
Tank Release
Button
Carry Handle
Pre-Motor
Filter
(not shown)
Dirt Tank
Swivel
Steering
Height
Adjustment
NOTE: The Crevice Tool is stored inside the Extension Wand.
4
www.BISSELL.com
Handle
Pet TurboEraser®
Tool
Stretch
Hose
Suction
Indicator
Pet Hair
Corner
Tool
Lifetime
Post-Motor
Filter
Recline
Pedal
Edge
Power Pedal
Bristles
Assembly
The only tool you will need to assemble your vacuum is a
Phillips screwdriver.
1
3
Dusting Brush
Tool
Insert the hose end into the back of the
vacuum and twist right to lock in place.
5
Cord
Rewind
Dusting Brush
NOTE: The Powerfoot will not suction properly unless the hose is firmly attached.
2
Place the upper handle onto
the base and push it down.
Then attach the handle with
the 2 screws taped to the
Insert the extension wand base and
handle in a plastic bag.
turn it to the right to lock in place.
4
Now, put your accessory tools on the vacuum and you're ready to go!
Pet Hair Corner Tool TurboEraser® Tool
Wrap hose up and
around the hose
wrap on the handle.
Slide end of hose
into vacuum base.
Extension Wand
(Crevice Tool stores inside)
5
www.BISSELL.com