Table of Contents
Advertisement
Maintenance and Specifications
POWER STEERING FLUID
Refer to scheduled maintenance information for the service interval
schedules.
• 2.3L I4 Engine
• 3.0L V6 Engine
1. Start the engine and let it run until it reaches normal operating
temperature (the engine coolant temperature gauge indicator will be
near the center of the normal area between H and C).
2. While the engine idles, turn the steering wheel left and right several
times.
3. Turn the engine off.
4. Check the fluid level in the reservoir. It should be between the
MIN/MAX or upper and lower lines. Do not add fluid if the level is in this
range.
5. If the fluid is low, add fluid in small amounts, continuously checking
the level until it reaches the range between the MIN/MAX or upper and
lower lines. Be sure to put the cap back on the reservoir. Refer to
Maintenance product specifications and capacities in this chapter for
the proper fluid type.
294
2009 Milan (mln)
Owners Guide
USA (fus)
Advertisement
Table of Contents
