Table of Contents
Advertisement
To connect the water line to the refrigerator
1. Connect the plastic line from the rear of the refrigerator to the outlet of the cartridge
holder until the plastic line is fully inserted.
2. Clamp either ends of the cartridge holder using the plastic clips.
3. Turn the water line on and check for leaks.
CAUTION
• Use only potable water.
• The filter cartridge is not provided. You must purchase it at a local service center.
• When moving the refrigerator for line connection, use caution so that you don't step on
the power cord or water line (for the ice maker).
Untitled-12 33
01
02
03
04
CAUTION
• The water line must be connected
outside of the refrigerator.
• Do not use copper lines.
• If cutting the tubing for resizing, make
sure the ends of the tubing are vertically
clean cut.
01 Cartridge holder
02 Plastic clip
03 Plastic line
04 Filter cartridge
English
33
2018-06-04
11:50:15
Advertisement
Table of Contents
