Powerboost Function; Use Limitations; To Turn On; To Deactivate - Bosch NIB6 E1 Series Instruction Manual

Powerboost function

The Powerboost function can be used to heat large amounts of
water more quickly than the power level

Use limitations

This function may be used for all hotplates, provided that the
other hotplate in the same group is not switched on (see
figure). Otherwise, and the power level will flash on the
›
selected hotplate display; the previously selected power level
will then be automatically set, without turning on the function.
*URXS 
 
 
*URXS 

Automatic time limitation

If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. The
heat indicator / flash alternatively in the display.
• œ

Basic settings

The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator Function
Childproof lock
™‚
Deactivated.*
‹
Activated.
‚
Sound signals
™ƒ
Confirmation beep and error signal deactivated.
‹
Only confirmation beep deactivated.
‚
ƒ All signals activated.*
Return to basic settings
™‹
Personal settings.*
‹
Return to factory settings.
‚
*Factory settings
.
Š
*URXS 
 

 
*URXS 
, symbol and the residual
" ‰

To turn on:

Select the required power level.
1.
Press the boost symbol of the selected hotplate. The
G
2.
indicator lights up. The function has been turned on.

To deactivate

Press the boost symbol. The display
G
function will be deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
When the control is turned to setting 0, the indicator goes off.
The hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
›
goes out. The
›
9