Table of Contents
Advertisement
Empty pans or those with a thin base
Do not heat empty pans, nor use pans with a thin base. The
hob is equipped with an internal safety system. However, an
empty pan may heat up so quickly that the "automatic switch
off" function may not have time to react and the pan may reach
very high temperatures. The base of the pan could melt and
damage the glass on the hob. In this case, do not touch the
Familiarise yourself with the appliance
These instructions for use are applicable to other hobs. On
page 2 an overview of the models is provided, along with
information on measurements.
The control panel
Control surfaces
Pressing a symbol activates its corresponding function.
The hotplates
Hotplate
Single hotplate
$
Grill plate
æ
Resistive plate-warming plate*
q
* Turning on the hotplate: The corresponding indicator lights up.
Once this has been activated, you do not need to have any other hotplate switched on.
** The residual heat warning light comes on.
Only use pans suitable for induction cooking, see the "Appropriate cookware" section.
Residual heat indicator
The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching a hotplate that displays
this.
6
&RQWURO SDQHO IRU
# FKLOGSURRI ORFN
&RQWURO SDQHO IRU
ERRVW * SRZHUERRVW
IXQFWLRQ
Turning on and off
Use a correctly sized pan.
The hotplate turns on automatically when a pan the same size as its outer
edges is placed on it.
To turn on: switch on a hotplate. Press the
Then press the
To turn off: press the
pan and switch the hotplate off. If it fails to work after it has
cooled down, please contact the Technical Assistance Service.
Pan detection
Each hotplate has a minimum limit for detecting pans, which
varies depending on the material of the pan being used. You
should therefore use the hotplate that is most suitable for the
diameter of your pan.
,QGLFDWLRQV IRU
SRZHU OHYHO³É
IXQFWLRQDOLW\ ¯
UHVLGXDO KHDW ¤‡
SRZHUERRVW IXQFWLRQ °
&RQWURO SDQHOV IRU
à + SODWHZDUPLQJ ]RQH
Notes
The settings will not change if several symbols are pressed at
■
the same time. This enables the programming zone to be
cleaned when food is spilt.
Always keep the control surfaces dry. Moisture can affect
■
proper functioning.
Û
symbol.
symbol.**
Û
Even when switched off, the
the hotplate remains hot.
If the pan is removed before the hotplate is turned off the
indicators and the selected power level will appear alternately.
symbol, the
indicator lights up.
H
H
œ
/
•
light will remain on as long as
/
œ
•
Advertisement
Table of Contents
