Introduction Of Special Functions; Replacing Batteries In Remote Controller And Notes - Gree GMV-ND28C/A-T Owner's Manual

④. Press TOFF button again to cancel timer and OFF is not displayed.
2). Setting timer on
①. Pressing TON button, "ON" is blinking and time displaying zone displays the timer time of
last setting.
②. Press
③. Press TON button again to confirm setting. ON is displayed and time displaying zone
resumes to display current time.
④. Press TON button again to cancel timer and ON is not displayed.

5.4 Introduction of special functions

(1). Setting child lock
Press and
displayed.
Press and
not displayed.
If the buttons are locked,
button is invalid.
(2). Switching temperature scale
In unit off status, press MODE button and
between ℃ and ℉.
(3). Setting energy-saving function
In unit on status and
enter energy-saving mode.
 When
 When
If you want to turn off the energy-saving function, press CLOCK and TEMP button and
not displayed.
energy-saving function is only available in
Notes:
switching mode or setting sleep function.
(4). Absence function
In unit on status and under heat mode,
absence function. Temperature displaying zone displays 8 and
Press CLOCK and TEMP button simultaneously again to exit absence function. Temperature
displaying zone resumes previous display and is not displayed.
In winter, absence function can keep the indoor ambient temperature above 0℃ to avoid
freezing.
Absence function is only available in heating mode and it will be exited when switching
Notes:
mode or setting sleep function.

5.5 Replacing batteries in remote controller and notes

(1). Lift the cover along the direction of arrow (as shown in Fig 1①).
(2). Take out the original batteries (as shown in Fig 1②).
(3). Place two 7# (AAA 1.5V) dry batteries, and make sure the position of "+" polar and "-" polar
is correct (as shown in Fig 2③).
(4). Reinstall the cover (as shown in Fig 2④).
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Multi Variable Air Conditioners Floor and Wall Mounted Type Indoor Unit
or button to adjust the timer time.
button simultaneously to lock the buttons on remote controller and
button simultaneously again to unlock the buttons on remote controller and is
blinks 3 times when pressing the button and any operation on the
under cool mode,
is displayed, energy-saving function is on.
is not displayed, energy-saving function is off.
button simultaneously to switch temperature scale
press CLOCK and TEMP button simultaneously to
cooling mode and it will be exited when
press CLOCK and TEMP button simultaneously to enter
19
is displayed.
is
is