Cleaning The Drain Pump Filter - Philco PLD 106 ECZ Owner's Manual

p Cleaning The Drain Pump Filter
Warning!
• Be careful of the hot water!
• Allow detergent solution to cool down.
• Unplug the machine to avoid electrical shock before washing.
• Drain pump filter can filter the yarns and small foreign matters from the washing.
• Clean the filter periodically to ensure the normal operation of washing machine.
1
Open the Service filter
Caution!
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap plates should be inserted
aligning to hole plates otherwise water may leak;
• Some machines don't have emergency drain hose, rotate lower cover cap directly to make water run into
basin.
• When the appliance is in use and depending on the programme selected there can be hot water in the
pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the
cycle, and is empty. When replacing the cover, ensure it is securely re-tightened.
Copyright © 2020, Fast ČR, a. s.
2
Open the filter Remove extraneous
by turning to the matter
counter clockwise
3 4
Close the lower cover
cap
EN - 25
Revision 10/2022