Cleaning The Inlet Filter - Philco PLD 106 ECZ Owner's Manual

p Cleaning The Inlet Filter
Note!
• Inlet filter must be cleaned if there is less water.
Washing the filter in the tap
1. Close the tap.
2. Remove the water supply hose from the tap.
3. Clean the filter.
4. Reconnect the water supply hose.
Washing the filter in washing machine:
1. Screw off the inlet pipe from the backside of the machine.
2. Pull out the filter with long nose pliers and reinstall it back
after being washed.
3. Use the brush to clean the filter.
4. Reconnect the inlet pipe.
Note!
• If the brush is not clean, you can pull out the filter washed separately;
• Reconnect, turn on the tap.
Clean The Detergent Dispenser
1. Press down the arrow location on softener cover inside the dispenser drawer.
2. Lift the clip up and take out softener cover and wash all grooves with water.
3. Restore the softener cover and push the drawer into position.
1
Pull out the dispenser
drawer with press the A
Note!
• Do not use alcohol,solvents or chemical products to clean the machine.
EN - 24
Copyright © 2020, Fast ČR, a. s.
2
Clean the dispenser
drawer under water
3
Clean inside the recess
with an old toothbrush
4
Insert the dispenser
drawer
Revision 10/2022