General Introduction Mount Metal Case Infrared Lights Lens Spotlight Built-in Mic Weatherproof Lid Ethernet Port Reset Button * Press and hold for 10 seconds to restore the camera to factory settings Power Port (Optional) NOTE: NOTE: out the camera included in the package and check out the details from out the camera included in the package and check out the details from the correpsonding introduction above.
Before using the camera, please connect the camera to App Cam 4K NVR. DC Power Reset Button eSATA AUDIO Network (LAN) DC48V HDMI Note: The camera should be powered with a Uniden App Cam 4K NVR (not included in the package). Please set up the camera via the NVR interface.
Mount the Camera Installation Tips • Do not face the camera towards any light sources. • Do not point the camera towards a glass window. Or, it may result in poor image quality because of the window glare by infrared LEDs, ambient lights or status lights. •...
Page 6
Installation Tips Step 1 Drill holes in accordance with the mounting hole template. NOTE: Use the drywall anchors included in the package if needed. Step 2 Install the mount base with the mounting screws included in the package. NOTE: Run the cable through the cable notch on the mount base.
Page 7
Step 3 To get the best field of view, loosen the adjustment knob on security mount and turn the camera. Step 4 Stiffen the adjustment knob to lock the camera.
If the Infrared LEDs of your camera stop working, please try the following solutions: • Enable infrared lights on Device Settings page via Uniden Solo App. • Check if the Day/Night mode is enabled and set up auto infrared lights at night on Live View page via Uniden Solo App.
Specifications Model App Cam 4K Bullet-S Image Sensor 1/2.8” CMOS Sensor Video Resolution up to 3840x2160 (8MP) 4K up to 25 fps Video Compression H.265 Video & Audio Viewing Angle Horizontal: 87° Vertical: 44° Night Vision Up to 30 Meters...
Accessories 90 Days If a warranty claim is made, this warranty will not apply if the Product is found by Uniden to be: A. Damaged or not maintained in a reasonable manner or as recommended in the relevant Owner’s Manual;...
Page 11
Product does not conform with this warranty, you should deliver the Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden. Please refer to the Uniden website for address details. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim.