Table of Contents
Advertisement
#
Rebound Damping
CRF1100A/D
You can adjust the rebound damping by the
adjuster to suit the load or the road surface.
Turn the adjuster using the Standard/Phillips
screwdriver provided on the underside of the
rear seat.
P. 248
2
Turn clockwise to increase rebound damping
(hard), or turn counterclockwise to decrease
rebound damping (soft).
The standard position is 8 clicks from the
maximum setting so that the punch mark on
the adjuster aligns with the reference punch
mark.
Other Adjustments
u
Adjuster
NOTICE
Do not turn the adjuster beyond its limits.
NOTICE
The rear shock absorber damper unit contains
high pressure nitrogen gas. Do not attempt to
disassemble, service, or improperly dispose of
the damper. See your dealer.
Adjusting the Rear Suspension
Reference
punch mark
Punch mark
Continued
303
Hide quick links:
Advertisement
Chapters
Table of Contents
