Lexus IS 250C 2014 Manual page 405

Reset the "MAINT REQD" message (U.S.A. only)
■
After the required maintenance is performed according to the maintenance sched-
ule, please reset the maintenance data.
To reset the data, follow the procedures described below:
Switch the display to the odometer (P. 161) when the engine is running.
STEP 1
Turn the "ENGINE START STOP" switch OFF.
STEP 2
While pressing the trip meter reset button, set the "ENGINE START
STEP 3
STOP" switch to the IGNITION ON mode (but do not start the engine
because otherwise the reset mode will be cancelled). Continue to press
and hold the button until the trip meter displays "000000".
Allow inspection and repairs to be performed by a Lexus dealer
■
Lexus technicians are well-trained specialists and are kept up to date with the
●
latest service information. They are well informed about the operations of all
systems on your vehicle.
Keep a copy of the repair order. It proves that the maintenance that has been
●
performed is under warranty coverage. If any problem should arise while your
vehicle is under warranty, your Lexus dealer will promptly take care of it.
CAUTION
If your vehicle is not properly maintained
■
It could result in serious damage to the vehicle and possible serious injury or death.
Warning in handling of battery
■
Engine exhaust, some of its constituents, and a wide variety of automobile com-
●
ponents contain or emit chemicals known to the State of California to cause can-
cer and birth defects and other reproductive harm. Work in a well ventilated area.
Oils, fuels and fluids contained in vehicles as well as waste produced by compo-
●
nent wear contain or emit chemicals known to the State of California to cause
cancer and birth defects or other reproductive harm. Avoid exposure and wash
any affected area immediately.
Battery posts, terminals and related accessories contain lead and lead com-
●
pounds which are known to cause brain damage. Wash your hands after han-
dling. (P. 427)
4-2. Maintenance
405
4