Indicator
Name
Safety Support
Indicator (Amber)
On/Blinking
●
Comes on when RDM and/or CMBS
itself off.
TM
shuts
●
Indicator may come on temporarily when passing
through an enclosed space, such as a tunnel.
The area around the radar sensor is blocked by dirt,
●
mud, etc. Stop your vehicle in a safe place and wipe
the debris off with a soft cloth. Indicator may take
some time to go off after the radar sensor is
cleaned.
Have your vehicle checked by a dealer if the
●
indicator does not go off even after you have
cleaned the radar sensor.
2 Radar Sensor P. 483
Stays on - The temperature inside the camera is
●
too high.
Use the climate control system to cool down the
camera.
The system activates when the temperature inside
the camera cools down.
2 Front Sensor Camera P. 481
●
Stays on - The area around the camera is blocked
by dirt, mud, etc. Stop your vehicle in a safe place
and wipe the debris off with a soft cloth.
Have your vehicle checked by a dealer if the
●
indicator and message are still displayed even after
you have cleaned the area around the camera.
2 Front Sensor Camera P. 481
uuIndicatorsu
Explanation
Continued
95