Acura TLX 2021 Owner's Manual page 162

■
Storing a Position in Memory
Memory Button 1
Memory Button 2
SET Button
■
Recalling the Stored Position
Memory Buttons
uuOperating the Switches Around the Steering WheeluDriving Position Memory System
1. Set the power mode to ON. Adjust the
driver's seat and door mirrors to the desired
position.
2. Press the SET button.
u The memory button indicator lights will
blink.
3. Press and hold memory button
within five seconds of pressing the SET
button.
u Once the seat and the door mirror
positions have been memorized, the
indicator light on the button you pressed
stays on and you will hear the double-
beep.
1. Put the transmission into ( P .
2. Press a memory button ( 1 or
(
u The indicator light will blink.
The seat and the door mirrors will
automatically move to the memorized
positions. When they have finished moving,
the indicator light stays on.
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat or the door mirror position
before the double-beep.
•
You set the power mode to any position except
ON.
1 or
( ( 2
Models with mode selector
•
You press the mode selector up or down.
1Recalling the Stored Position
The seat and the door mirrors will stop moving if you:
•
Press the SET button or memory button
2 ).
(
•
Adjust the seat position or door mirrors.
•
Put the transmission into a position other than
Models with mode selector
•
You press the mode selector up or down.
or .
( 1 2 (
.
P (
161