Table of Contents
Advertisement
Cleaning and care
Cleaning the drawer front and
interior
Malfunction can occur due to
dirty and/or covered sensor buttons.
The sensor buttons do not react or
unintentional switching procedures
result, perhaps even the automatic
deactivation of the drawer.
Keep the sensor buttons and indica-
tors clean.
Do not place anything over the sen-
sor buttons or indicators.
It is best to remove normal soiling im-
mediately using a clean sponge and a
solution of warm water and liquid
dish soap or with a clean, damp mi-
crofiber cloth.
Wipe with clean water afterwards.
After cleaning, wipe the surfaces dry
using a soft cloth.
38
Cleaning the non-slip liner
Damage due to incorrect clean-
ing.
Washing the non-slip liner in a dish-
washer or washing machine will
damage it.
The non-slip liner should only be
cleaned by hand.
Damage caused by incorrect
drying.
Drying the non-slip liner in an oven
will damage it.
Never place the non-slip liner in the
oven to dry.
Remove the non-slip liner from the
drawer.
Clean the non-slip liner with warm
water and a small amount of liquid
dish soap.
Then dry the non-slip liner with a
cloth.
Replace the non-slip liner in the
drawer only when it is completely dry.
Advertisement
Table of Contents
