Stamina X 35-1102B Owner's Manual page 10

ASSEMBLY INSTRUCTIONS
STEP 5
Insert the HANDLEBAR(5) through the HANDLEBAR SLEEVE(41). Slide the FOAM GRIP(39) onto the
protruding end of the HANDLEBAR(5).
NOTE: Lubricate the HANDLEBAR(5) with a small amount of liquid soap or water for easier installation
of the FOAM GRIP(39).
STEP 6
To help install the BOTTLE HOLDER(35), loosen the ROUND HEAD SCREW(ST4.2x16mm)(72) on the
RIGHT COVER(34). Push the BOTTLE HOLDER(35) into the gap of the LEFT and RIGHT COVERS
(33, 34). Tighten the ROUND HEAD SCREW(ST4.2x16mm)(72) on the RIGHT COVER(34). Attach the
BOTTLE HOLDER(35) to the LEFT and RIGHT COVERS(33, 34) with ROUND HEAD SCREWS
(ST4.2x16mm)(72).
STEP 7
Press the ENDCAPS(45) onto both sides of the RAIL FRAME(2).
45
35
72
2
45
5
41
33
72
10
39
34
72
( Loosen to install the
BOTTLE HOLDER(35).
Tighten after the installation. )