SITRANS FM100
Parameter table Measuring
Sublevel
Para-
Subpara-
meter
meter level
level
1
Unit
List selection
Flow
sepa-
value input
ration
Simula-
tion
See table Simulation mode
mode
Counter
absolute/
Type
bidirectional
Volume
Unit
List selection
Unit
List selection
Tem-
perature
Simula-
tions-
See table Simulation mode
modus
Counter
absolute/
Type
bidirectional
Unit
List selection
Part
volume
memory
Yes/No
reset
Simula-
tion
See table Simulation mode
mode
10.5 Dosing function
see section 12
10.6 Outputs
The FM100 flowmeter provides a total of 2 outputs that are freely configurable. The
configuration of the outputs (output 1 and output 2) is done via a wizard function.
The wizard function guides the user step by step through all necessary settings.
Steps:
•
Select output
•
Selection of the source or the measurement variable to be output (Flow,
Volume, Temperature, Part volume)
•
Selection of an output type (4-20 mA, 0-20 mA, 0-10 V, 2-10 V, alarm, pulse,
frequency output,IO-Link, control input)
•
Setting the output (scaling, thresholds)
•
Save the configuration
page 26
Sub-
Sub-
Description
para-
para-
meter
meter
level 2
level 3
Sets the flow unit
Sets the value for the
low flow cutoff
Sets the counting
mode
Sets the volume unit
Sets the temperature
unit
Sets the counting
mode
Sets the volume unit
Sets the counter
value to "0"
Value range/
Default
value list
value
LPM
L/m, L/h, m3/h,
galUS/m,
galUS/h,
L/m
galUK/m,
galUK/h, L/s,
mL/s, User
0 ≤ Value ≤
Range start
Range start
absolute
ml, L, m3,
galUS, galUK,
L
User
°C, °F, User
°C
absolute
ml, L, m3,
galUS, galUK,
L
User
A5E48762204-AA
Default
value
GPM
galUs/
m
L
°C
galUs