Honda CR-V 2023 Owner's Manual page 493

uuHonda Sensing®uLow Speed Braking Control
■
How the System Works
■
Assistive braking
Assistive braking provides a visual and audible alert when the vehicle is moving
between approximately 1 and 6 mph (2 and 10 km/h) and there is the possibility of
a collision with a detected wall or other obstacles, as well as providing assistance
with braking.
If the only rear sensors are turned off using the parking sensor system, the assistive
braking will not work when reversing.
2 Parking sensor system on and off P. 569
* Not available on all models
492
*
Audible Alert
Beep
The vehicle Driver
applies brake depresses
brake pedal
1Low Speed Braking Control
For directions on the proper handling of the sonar
sensors, please refer to the following page.
2 Sonar Sensors
The vehicle will release the brake and start moving a
few seconds after the system is activated. To keep the
vehicle stopped, keep the brake pedal depressed or
put the transmission into
Beep
In order to prevent the system from activating when
not needed, always turn it off during vehicle
maintenance, when loading on ships, trucks, and so
on, or when using a chassis dynamometer or free
rollers for inspection or when washing the car in
conveyor type car wash machine.
If you put any accessories on or around the rear
sensors, the Low Speed Braking Control System may
activate if it detects these accessories as an obstacle.
In this case, turn off the rear sensor.
2 Customized Features P. 362
Stop Remove
brake after
maintaining
stationary
position
*
*
P. 555
( P .