Programme Information - Electrolux EWS 1020 Instruction Booklet

132991810.qxd 29/10/2003 09:22
14 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on. When the programme has
finished, the End
Prewash
Main wash
Rinses
Stop with water in the tub
Drain
Spin
Clogged filter
End
The END pilot light flashes in the event of
operating problems.
At the same time an alarm code appears on the
display.
E10 = the machine does not fill
E20 = the machine does not empty
E40 = the door has not been closed
To eliminate the problem, see paragraph "Something
not working".
If at the end of the programme the pilot light
flashes this means that the drain filter must be
cleaned.

Programme information

With this programme it is possible to rinse and spin
the garments which have been washed by hand.
The machine performs 3 rinses, followed by a final
spin at the maximum speed.
The spin speed can be reduced by depressing
button .
The final spin is foreseen only for cotton items as in
the spin programme.
For emptying out the water of the last rinse in
programmes with the Rinse hold
Turn first the programme selector dial to O, then
select programme B and depress the
START/PAUSE button.
Pagina 11
pilot light comes on.
A = Rinses
B = Drain
option.
C = Spin
Separate spin at the maximum speed for hand
washed garments. It has to be used for cotton
items. You can reduce the speed by means of
button to adapt it to the fabrics to be spun.
D = Delicate spin
Separate short spin at the maximum speed 700 rpm
for hand washed garments. It has to be used for
synthetic, delicate, wool/handwashed, silk items.
You can reduce the speed by means of button
to adapt it to the fabrics to be spun.
O = Cancelling
To reset a programme turn the selector dial to O.
Now can a new programme be selected.
11