Bosch B1 RKM 10015 Instructions For Use Manual page 29

Ioniser
Mode/Ion
The appliance is fitted with a change filter
indicator light, which comes on every 300 hours
of use. The purifying filter should be changed as
soon as this indicator light comes on. The
reference for the purifying filter is B1 RKZ 09013
and it can be purchased at specialised outlets.
Press the two buttons
time for a period of two seconds to clear the
change filter indication.
N.B.
The air purification function only works in
manual mode. The automatic "turbo" and
"silent" modes are not available for this
function.
We recommend you leave the optional filters in
position regardless of the desired function
setting (cooling, dehumidification, air
purification). The appliance purifies the air
more efficiently in this way.
Your climate control system is fitted with an ioniser
which can be connected in conjunction with other
functions. The ioniser releases negative ions into
the air. These negative ions have a positive
influence on health and well-being. Ionised air is
fresh and pure, similar to that produced after a
summer storm.
Press the "Mode/Ion" button for two seconds to
Speed
turn the ioniser on. When the ioniser is on, the
indicator light beneath the symbol
control panel comes on and the appliance emits
two beeps.
Press the "Mode/Ionv button again for two
seconds to turn the ioniser off. The indicator light
beneath the symbol on the control panel goes
out and the appliance emits one beep.
The ioniser can work in different modes (cooling,
dehumidification and air purification) and at all
speeds.
Temp/
Time
and at the same
on the
29