Auto Setup For Appropriate Surround Effects (Intellibeam); Installing The Intellibeam Microphone - Yamaha YRS-2500 Owner's Manual

Auto setup for appropriate surround effects (IntelliBeam)

In order for this unit to provide the optimal listening experience, adjust each channel
first using the "IntelliBeam" function.
• The AUTO SETUP procedure may not be run successfully if this unit is installed in one of the rooms
described in "Unrecommended listening environments" on page 15.
• In order for this unit to provide the optimal listening experience, adjust each channel first using the
"IntelliBeam" function. The My Surround function can be used to enjoy rich surround sound in these types
of rooms as well. See "Switching between audio output methods for surround playback" (p. 34) for more
information.
• Do not connect the IntelliBeam microphone to an extension cable as doing so may result in an inaccurate
sound optimization.

Installing the IntelliBeam microphone

1
Place the IntelliBeam microphone at your normal listening position.
❑ Assembling the supplied cardboard microphone stand
1
Remove
Place horizontally
4
24
Initial settings
En
2 3
Fit in
Fit in
5
Run through
• Use the supplied cardboard microphone stand or a tripod to place the IntelliBeam
microphone at the same height as your ears would be when you are seated.
• Position the IntelliBeam microphone so that it is parallel with the floor.
IntelliBeam microphone
Center height of
this unit
Cardboard
microphone stand
1.8 m or more
Center line
Cardboard microphone stand
Make sure that there are no obstacles between the IntelliBeam microphone and the
walls in your listening room as these objects obstruct the path of sound beams.
However, any objects that are in contact with the walls will be regarded as a protruding
part of the walls.
Upper limit
Within 1 m
Within 1 m
Listening position
Lower limit
IntelliBeam microphone