Dynamic Range; Matrix Decoder - Yamaha YRS-2500 Owner's Manual

Surround sound tv stand
Hide thumbs Also See for YRS-2500:
Table of Contents

Advertisement

Available languages

Available languages

DYNAMIC RANGE

SETUP MENU
Adjust this unit's dynamic range (difference between maximum and minimum volumes).
Settings
Min: Sets dynamic range at a level that supports comfortable listening at low
volumes.
Min/Auto
Auto: Sets dynamic range in accordance with information received from input
signal.
Standard
The dynamic range recommended for regular home use.
Max (default)
Outputs sound without adjusting the dynamic range of the input signals.
• "Adaptive DRC" is automatically set to "OFF" when the settings other than "Max" is selected.

MATRIX DECODER

SETUP MENU
Set the surround decoder.
When this unit plays back 2-channel or 5.1-channel sources in the surround mode,
surround decoder enables them playback for 7.1-channel. You can enjoy a variety of
surround sound effects by switching the decoder.
To enable a surround decoder, press the CINEMA DSP key to select "DSP Off".
50
Setup menu
En
SOUND
DYNAMIC RANGE
SOUND
MATRIX DECODER
Settings
PLII Movie*
Use the Dolby Pro Logic II decoder suitable for movies.
(default)
PLII Music*
Use the Dolby Pro Logic II decoder suitable for music.
PLII Game*
Use the Dolby Pro Logic II decoder suitable for games.
Neo:6 Cinema
Use the DTS Neo: 6 decoder suitable for movies.
Neo:6 Music
Use the DTS Neo: 6 decoder suitable for music.
* When 7.1-channel audio is output based on the selected sound beam output method
(p. 48), the Dolby Pro Logic PLIIx surround decoder is used.
• Decoders are disabled when stereo playback mode (p. 36), My Surround (p. 35, 36), or target playback
mode (p. 37) is enabled.
• Dolby Pro Logic IIx Music parameters (Center Width, Panorama, and Dimension) can be adjusted from the
setup menu (p. 51).
❑ About the surround decoder for playback of 5.1-channel sources
When "CHANNEL OUT" (p. 48) is set to "7.1ch", this unit decodes 5.1-channel sources
and then playback them in up to 7.1-channel surround. One of the following decoders
is automatically selected depending on the input signals.
Input signal (5.1 ch)
PCM, Dolby Digital, Dolby Digital Surround EX, Dolby TrueHD,
Dolby Digital Plus
DTS, DTS-ES matrix, DTS-HD Master Audio, DTS-HD High
Resolution Audio, DTS Express
DTS-ES discrete
Decoder
Dolby Pro Logic IIx Movie
Dolby Pro Logic IIx Music
DTS-ES matrix
DTS-ES discrete

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yrs-1500

Table of Contents