Table of Contents
Advertisement
Assembly
Caution!
Do not use a tool that has previously been in contact with conventional steel. Smallest steel
particles could be transferred that could lead to contact corrosion.
Installing the rear light
In trailer mode, a certified rear light must be used during poor visibility or darkness in accordance with
the Road Traffic Licensing Requirements.
Move the push handle to the lowest position.
f
Mount the rear light below the left joint of the push
f
handle.
Tip!
Follow the attached manufacturer's information for the work of the rear light.
20 – 06|2019 – Subject to change.
Kidgoo 2019
Advertisement
Table of Contents
