Craftsman 320.17217 Operator's Manual page 5

When indoubt, u sethenextheavier gauge. Always useULandCSA listed
extension cords.
Recommended sizes of extension cords
Ampere Rating
More Than
0
6
10
12
Not More Than
6
10
12
16
Volts
120v
Total Length of Cord in feet
25ft 50ft 100ft 150ft
AWG
18 16
18 16
16 16
14 12
16 14
14 12
14 12
Not Recommended
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use tool while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention while
operating power tools may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in moving parts.
Avoid accidental starting. Be sure switch is off before plugging in.
Carrying tools with your finger on the switch or plugging in tools that have
the switch on invites accidents.
Remove adjusting keys or wrenches before turning the tool on. A wrench
or a key that is left attached to a rotating part of the tool may result in
personal injury.
Do not overreach. Keep proper footing and balance at all times. Proper
footing and balance enables better control of the tool in unexpected
situations.
= Use safety equipment. Always wear eye protection. Dust mask, non-skid
safety shoes, hard hat, or hearing protection must be used for appropriate
conditions.
Before connecting the tool to a power source (receptacle, outlet, etc.},
be sure voltage supplied is the same as that specified on the nameplate
of the tool. A power source with voltage greater than that specified for the
tool can result in serious injury to the user - as well as damage to the tool.
TOOL USEAND CARE
• Use clamps or other practical way to secure and support the workpiece
to a stable platform. Holding the work by hand or against your body is
17217 Manual Revised 09-0708 Page 5