Table of Contents
Advertisement
CONNECTION OF DRAIN HOSES
Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let it run into the sink, making
sure to avoid bending or crimping it. The top of the hose must be at a height between 30 and 80 cm. The
free end of the hose must not be immersed in water to avoid the back flow of it.
To prevent back flow for models, secure the drain hose to the side wall of the kitchen cabinet using
cable ties or other fixtures.
POSITION THE APPLIANCE
Position the appliance in the desired location. The back should rest against the wall behind it, and the sides,
along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses that
can be positioned either to the right or the left sides to facilitate proper installation.
Levelling the Appliance
Once the appliance is positioned for levelling, the height of the
dishwasher may be altered via adjustment of the screwing level of the
feet. In any case, the appliance should not be inclined more than 2°.
START OF DISHWASHER
The following should be checked before starting the dishwasher.
1. the dishwasher is level and fi xed
2. the inlet valve is open
3. There is no leakage at the connections of the conducts
4. the wires are tightly connected
5. the power is switched on
6. the inlet and drain hoses are not knotted
7. All packaging materials and printings have been removed from the dishwasher
ATTENTION: After installation please put this manual in a safe place. The contents of this manual can
be useful to users.
DW5500M_DD81-02437Q-00_EN.indd 33
DW5500M_DD81-02437Q-00_EN.indd 33
Setting up your dishwasher _33
2019-06-25
2019-06-25
11:13:27
11:13:27
Advertisement
Table of Contents
