Product Schematic Description Charge the charging case Connect the charging case to the 5V power adapter with Type-C charging cable. Tips: When the ice blue indicator flashes while closing the cover, please charge in time. Indicator guide...
Pairing Method 1: open the charging case, the headphones will start pairing automatically . Method 2: search and click for “Monster Airmars XKT03” on the Bluetooth list of the smart device, and when connection is successful, ”Connected” will be heard.
Note: Fully charge the headphones and power off before an intended not-in -use period. Unplug the charging cable after charging. Operation Restore factory settings Either headphones is not connected to the bluetooth device when turned on, click the MFB 5 times to clear the previous pairing information and turn off.
Page 6
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 7
This table is compiled according to SJ/T 11364. O: Indicates that this hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572. X: Indicates that this hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572 Environment Friendly Use Period (EFUP)